Inline Fabrication Flush Mount Quick Change System Base Plate

The flush mount quick change system base plate is for the reloader who's bench serves many purposes. Enjoy a clear, flat work space when you want it, but in only 30 seconds, you can mount a vise, case trimming tools or your favorite press and get to work. Heavy duty 3/16 & 1/4 thick steel construction can take anything you can throw at it.

Swapping out presses/tools takes less than 30 seconds and requires no tools.

This plate is made to be routed into your bench to create a nice, flat unobstructed workspace. It also allows folks to use the quick change system, with-out adding any height to their equipment, user ergonomics or to avoid overhead cabinets, etc. The plate is 8"x8" square and overhangs the bench face 1 1/2". Also, It can be mounted flat to your benchtop if you don't want to route it in flush. If you choose to do that, you will want the rise plate which is sold separately.

Note: (The leg in the photo does not come with the kit, it is the leg to the bench.)

Note2: Required routed out depth is exactly 7\16" deep.

!!Required!! Quick change top plates (Each reloading press or piece of equipment you want to use with the quick change set up, needs its own top plate.)