It took a while, but we are finally please to offer the perfect solution for attaching our large magnet to the body of the DAA Racer Magazine pouch.
The Racer pouch has a sturdy base, and a center rotation screw which locks firmly and does not come loose or lose its setting. This is what makes it possible to attach the magnet directly to the pouch body with confidence.
To ensure that the screw is held firmly in place, we insert an M5 thermal brass nut into the plastic front panel of the pouch, seating it deeply into the plastic to provide a firm 6mm long thread for the magnet’s screw to attach to. A little manual cleaning on the inside of the pouch ensures that the smooth clean drawing of the magazine from the pouch is not affected in any way.
Special Note: Glock or CZ TS Users There may be a fit issue with Glock and CZ ST mags. The side spacer is not a problem - you can use the thin one (same as STI) and if you really want it tighter side to side (not really needed, but) you can also place something behind that that thin spacer to sort that out. But the issue is more with the pressure spacer - the one the spring is seated into. The thin one does not work - and the thick one is a slightly too thick. The solution is to remove a little material from the front of the thick spacer. One needs to remove about 1mm in total. This can be done with a belt sander, or best with a mill if one is available.
There have been no reviews